Harvia KIP60W KIP Series 6kW Sauna Heater, Black
The Harvia KIP60W is a 6kW wall-mounted electric sauna heater for rooms up to 318 cubic feet, finished in black with no built-in controls. This listing is the heater only. A compatible Xenio or Fenix control unit and sauna stones are required for operation and sold separately. The KIP60W is the 6kW model in the Harvia KIP W-series - the mid-range option between the KIP45W (4.5kW, up to 248 cu ft) and the KIP80W (8kW, up to 424 cu ft). All three W-series models require an external Xenio CX30 or Fenix FX30 control unit and share the same compact black KIP wall-mounted body. A KIP60W Package listing is available at BathingBrands for buyers who prefer a bundled purchase with the Xenio CX30-U1-U3-XW control and stones.
KIP W-series - the Xenio and Fenix-compatible KIP
The Harvia KIP series divides into two control families. The KIP B-series (KIP45B, KIP60B, KIP80B) has built-in analog dials on the heater face for direct on-heater temperature and timer control - no external hardware required, but no WiFi connectivity. The KIP W-series (KIP45W, KIP60W, KIP80W) has no built-in controls and pairs with an external Xenio CX30 or Fenix FX30 control panel. The W-series configuration enables Xenio or Fenix WiFi app control from the day of installation: both the CX30-U1-U3-XW and the FX30-U1-U3-XC include built-in WiFi for remote preheat, scheduling, and temperature monitoring via the MyHarvia or MyHarvia 2 app. The Fenix FX30 additionally offers a 4.3" glass touchscreen, AI learning that adapts to the heater's heating curve, and smart timer scheduling. For buyers who want the KIP's compact black wall-mounted form with full digital and app connectivity, the KIP60W with a compatible control is the appropriate choice.
6kW - the mid-range KIP W for rooms up to 318 cu ft
The KIP60W covers rooms up to 318 cubic feet - the mid-range in the KIP W-series. For rooms where the KIP45W's 248 cu ft ceiling is insufficient but the full capacity of the KIP80W (up to 424 cu ft) is more than needed, the KIP60W is the correctly matched output. Rooms with cold surfaces - glass walls, tile floors, or masonry panels - should have their adjusted cubic footage calculated before selecting between the KIP45W and KIP60W: what appears to be a 250 cu ft room on raw dimensions may require the 6kW model when the cold surfaces are factored in. The Stone Requirements and Size Your Sauna documents below provide the specification guidance for correct room and stone sizing.
Black finish, compact form, wall-mounted
The KIP60W shares the same compact rectangular wall-mounted body as the KIP45W and KIP80W. Only the output and number of internal heating elements differ between KIP W models - the physical heater footprint, wall clearances, and installation procedure are the same across all three. The black finish suits contemporary dark-interior saunas and integrates with charcoal, slate, dark timber, and matte black hardware palettes. Sauna stones are required and sold separately - the Stone Requirements document specifies the correct stone type and quantity for the KIP60W. A licensed electrician is required for all electrical connections. Do not connect to a GFI/GFCI breaker.
6kW wall-mounted electric sauna heater for rooms up to 318 cubic feet. Black finish. KIP W-series - external Xenio or Fenix control required (no built-in controls). Required: Xenio CX30-U1-U3-XW or Fenix FX30-U1-U3-XC (both include WiFi, sold separately). Required: sauna stones (sold separately). Mid-range KIP W between the 4.5kW and 8kW models. Compact wall-mounted KIP form. Stainless steel construction. 240V / 1-phase. ETL Listed. Made in Finland by Harvia.
6 kW Up to 318 cu ft Black finish KIP W-series - external control required CX30-U1-U3-XW or FX30-U1-U3-XC required Both include WiFi - MyHarvia or MyHarvia 2 app Mid-range KIP W - between 4.5kW and 8kW Compact wall-mounted KIP form Stones sold separately 240V / 1-phase ETL Listed Made in Finland by Harvia
Specifications
Electrical
| Power output |
6 kW |
| Voltage |
240V / 1-phase / 60 Hz |
| Built-in controls |
No - external control required (W-series) |
| Required control units |
Xenio CX30-U1-U3-XW or Fenix FX30-U1-U3-XC |
| WiFi |
Included in both recommended control units |
| Certification |
ETL Listed |
Room sizing and stones
| Room volume |
Up to 318 cu ft |
| Stones included |
No - sold separately |
| Stone specification |
See Stone Requirements document below |
| Control included |
No - sold separately |
Design and installation
| Profile |
Compact wall-mounted - KIP form |
| Finish |
Black |
| Construction |
Stainless steel |
| Mounting |
Wall-mounted |
| Origin |
Made in Finland by Harvia |
Compatible control units
| Xenio CX30-U1-U3-XW |
Built-in WiFi - MyHarvia app - iOS and Android |
| Fenix FX30-U1-U3-XC |
Built-in WiFi - 4.3" touchscreen - MyHarvia 2 - AI learning |
| Both sold separately |
At BathingBrands - both include WiFi |
KIP W-series comparison
| KIP45W |
4.5kW | Up to 248 cu ft | External Xenio/Fenix |
| KIP60W (this listing) |
6kW | Up to 318 cu ft | External Xenio/Fenix |
| KIP80W |
8kW | Up to 424 cu ft | External Xenio/Fenix |
| All W-series |
Black finish | Same compact KIP body |
What's included
Harvia KIP60W 6kW wall-mounted sauna heater - black finish
Installation and operation manual
Required (not included): Xenio CX30-U1-U3-XW or Fenix FX30-U1-U3-XC control unit (both include WiFi, sold separately at BathingBrands); sauna stones (see Stone Requirements document). See also: KIP60W Package listing for a bundled purchase. A licensed electrician is required. Do not connect to a GFI/GFCI breaker.
Why the Harvia KIP60W stands out
Mid-range KIP W - 6kW for rooms up to 318 cu ft
The KIP60W is the correctly sized KIP W model for rooms from approximately 250 to 318 cubic feet that exceed the KIP45W's ceiling but do not require the full 8kW capacity of the KIP80W. For rooms with standard wood walls and moderate insulation in this range, the 6kW output is the precisely matched choice - not undersized and not oversized.
WiFi via Xenio CX30 or Fenix FX30
Both the Xenio CX30-U1-U3-XW and Fenix FX30-U1-U3-XC recommended for the KIP60W include built-in WiFi at no additional cost. Remote preheat, session scheduling, and temperature monitoring via MyHarvia or MyHarvia 2 are available from day one of installation without any add-on panel purchase. For rooms that take 25-40 minutes to heat at 6kW, the WiFi remote start is a practical daily convenience.
Compact KIP wall-mounted form
The KIP60W shares the same compact wall-mounted body as the KIP45W and KIP80W - the physical heater footprint, wall clearances, and installation procedure are identical across all three W-series output levels. More output for a larger room does not mean a larger heater in the KIP series. The compact form mounts close to the sauna wall with minimal projection into the room interior.
Fenix FX30 pairing - smart timer for 6kW
The Fenix FX30-U1-U3-XC paired with the KIP60W brings AI learning that tracks the heater's actual heating curve in the specific room and a smart timer that calculates the latest possible preheat start for a given session time - so the sauna is ready at the desired moment without starting early and holding temperature. For regular sauna users with consistent session times, the smart timer eliminates warm-up planning entirely.
Black finish - integrates with dark palettes
The black finish of the KIP60W suits sauna rooms with dark timber, charcoal tile, slate, and matte black hardware where a stainless heater would create unwanted visual contrast. The KIP W-series is available only in black - for stainless in the KIP series, the B-series (built-in dials, no WiFi) is the alternative, or the Spirit and Virta series offer stainless in the Xenio-compatible configuration.
Flexible control placement
The KIP60W's external control requirement means the Xenio or Fenix panel is installed at any location in or outside the sauna room independently of the heater position. For rooms where the heater is in a corner or high position where a fixed panel would be inconvenient, the separate control placement of the W-series is a practical advantage over the built-in dials of the B-series.
About Harvia
Made in Finland - ETL Listed
Harvia KIP60W. 6kW. Up to 318 cu ft. Black. KIP W-series. External Xenio or Fenix required.
Harvia is a Finnish sauna and spa company with over 70 years of manufacturing history. The KIP60W is the 6kW black mid-range model in the Harvia KIP W-series - a compact wall-mounted electric sauna heater for rooms up to 318 cubic feet that pairs with an external Xenio CX30-U1-U3-XW or Fenix FX30-U1-U3-XC control unit (both sold separately, both include WiFi). Stones are required and sold separately. See the KIP60W Package listing for a bundled purchase. We are an authorized Harvia dealer.
-
6kW, up to 318 cu ft - 240V/1PH, ETL Listed
- Black finish, compact KIP wall-mounted form
-
External control required - CX30-U1-U3-XW or FX30-U1-U3-XC (both include WiFi)
-
Mid-range KIP W - between KIP45W and KIP80W
-
Stones sold separately - KIP60W Package also available
Manuals and Documents
Warranty
Harvia limited warranty
The Harvia KIP60W is covered by Harvia's limited warranty from the date of purchase. The warranty covers defects in manufacturing and materials under normal use conditions. The warranty does not cover damage caused by improper installation, use without the required stone load, use of non-Harvia stones, connection to a GFI/GFCI breaker, operating without a compatible external control unit, or failure to follow Harvia's installation and operating guidelines. A licensed electrician is required for all electrical connections. Proof of purchase from an authorized Harvia dealer is required for warranty claims. We are an authorized Harvia dealer.
