product image

select caret down
Skip to content
☀️Summer Into Wellness! ☀️ Save up to $12,500 on select medical & wellness equipment. Shop
Rated by many
Review us on Trustpilot

4-Person Hyperbaric Chamber 1.3 ATA

Save $3,099.00 Save $3,099.00
Original price $29,999.00
Original price $29,999.00 - Original price $29,999.00
Original price $29,999.00
Current price $26,900.00
$26,900.00 - $26,900.00
Current price $26,900.00
  • Authorized Oxygen Health Systems Dealer
  • Lowest Price Guaranteed
  • Certified: ISO 9001, ISO 14001, ISO 13485
  • Questions? Call our Team: +1 251-292-1169
🏷️ LIMITED TIME OFFER! Use Code: MED8 for 8% Off
(Not valid on all brands)
FDA Disclaimer

At Mediriser, we are committed to transparency and believe in empowering you with the information you need to make informed decisions. Some products we sell are FDA-approved, while others are not intended or marketed as FDA-approved medical devices.

1. FDA-Approved vs. Non-FDA-Approved Products

Our curated selection of medical, mobility, and wellness equipment includes products that are FDA-approved for specific medical uses, ensuring your safety and peace of mind.

Other products — including certain soft hyperbaric chambers and wellness technologies — may be FDA-registered but not FDA-approved. Registration with the FDA indicates that the manufacturer has notified the FDA of the product’s existence; it does not imply approval or endorsement for medical use. In contrast, FDA approval means the product has undergone rigorous testing and evaluation by the FDA and is deemed safe and effective for its intended use.

2. Hyperbaric Chambers & Off-Label Use

The FDA has approved soft hyperbaric chambers operating at 1.3 ATA for treating altitude sickness.

Any use beyond this — including general wellness, recovery, performance enhancement, or treatment of chronic conditions — is considered off-label, even if the chamber is FDA-registered. Off-label use refers to using a product in a way that is not approved by the FDA. While it is not illegal, it is important to understand that the safety and effectiveness of the product for such uses have not been evaluated by the FDA.

3. No Medical Claims

Unless explicitly stated otherwise for specific FDA-approved products:

  • The FDA has not evaluated the products and statements on Mediriser.com.
  • Our equipment is not intended to diagnose, treat, cure, or prevent any disease.
  • Content on this website is for informational and educational purposes only and is not a substitute for medical advice.

4. Consult a Healthcare Professional

We strongly encourage all customers to speak with their healthcare provider before:

  • Starting any new recovery or wellness regimen
  • Using any equipment sold on our site
  • Treating existing conditions or symptoms

This is especially important for individuals who are pregnant, have pre-existing conditions, or are using prescription medications.

5. Results May Vary

Individual experiences may differ based on health status, product use, and lifestyle factors. No claims are made regarding guaranteed outcomes.

6. Limitation of Liability

Mediriser and its affiliates are not liable for any harm or adverse effects resulting from using or misusing our products. Users assume full responsibility for their decisions.

7. Questions?

If you have any questions about the FDA status of a specific product or would like further clarification:

Fast & Free Shipping

Free shipping to the lower 48 US States, no sales tax, and fast dispatch within 1-3 days.

Delivery time

Fast and Reliable Delivery: Receive your order within 7–10 business days.

Live Chat Support

Live chat available daily for instant help and a smooth shopping experience.

Certified Authorized Dealer

We are a Certified Authorized Dealer, ensuring authentic products, warranties, and expert support.

We can beat any price!

We guarantee the best price, ensuring you receive unbeatable value without compromising on quality or service.

Free Returns

Easy returns 30 day hassle-free returns

Questions? Call Us Now

+1-251-292-1169

4-Person Hyperbaric Chamber | 1.3 ATA | Multiplace Soft Shell

Our 4-Person Multiperson Hyperbaric Oxygen Chamber is feature-rich with all the built-in safety features one could ask for. Featuring medical-grade components, NASA technology integrated Dacron materials, inside and outside pressure gauges, and an emergency pressure release button. Four people can comfortably fit inside, measuring 6 feet wide and 8 feet tall. Now with a U-Style door, entry and exit is simple even for larger adults.

Ideal for clinics and wellness centers, this chamber accommodates multiple users simultaneously enhancing convenience, efficiency, and therapeutic value. With a pressure capacity of 1.3 ATA, this chamber provides effective oxygen therapy in a comfortable and safe multiplace environment. Two all-in-one medical-grade 10 LPM oxygen generator/compressor units are included at no additional cost, providing a total compressed air input of 210 LPM.

Financing Options available:

  1. Personal Financing options → Click Here
  2. Business Financing options → Click Here

Important Notes:

  • Can Be Operated Independently Without Assistance of a 2nd person.

Spacious 4-Person Multiplace Design

Measuring 6 feet wide and 8 feet tall, the interior comfortably accommodates up to 4 users simultaneously. The U-Style door design provides easy, wide-access entry and exit ideal for larger adults and mobility-challenged users. An external metal frame provides sturdy structural support throughout every session.

Dual Oxygen System 210 LPM Total Air Flow

Two all-in-one medical-grade 10 LPM oxygen generator/compressor units are included as standard, providing a total compressed air input of 210 LPM. The system delivers 95%+ oxygen under pressure via face mask. Our unique system prevents carbon dioxide build-up and filters pollutants down to the micron level through five carbon filters.

Air Conditioning System Included as Standard

Unlike competitors, we provide an air conditioning system as a standard feature. This dual-action system cools the air from the compressor and routes cold water through an interior condenser providing substantial, consistent cooling throughout every session. An air cooler and dehumidifier are also integrated at no additional cost.

International Sales

We sell internationally and can provide our systems to your international voltage and plug type requirements.

A positive patient experience

Our HBOT chamber comes equipped with all the essentials to ensure sessions run smoothly. The interior is designed to be as comfortable as possible, with 4 viewport windows providing light and visibility. The U-Style door allows for easy entrance and exit for all users.

Optimal Air Conditioning

An air conditioning system is included as standard with this multiplace chamber along with an integrated air cooler and dehumidifier at no extra cost. We are the only hyperbaric manufacturer to offer an air conditioning system designed specifically for use with hyperbaric oxygen chamber systems.

Interior Comfort & Operation

The interior features a memory foam mattress for greater comfort during sessions. An antistatic earthing mat is included. Internal and external controls allow the chamber to be operated without a second person. Sessions can be run continuously, making this system ideal for clinics and doctor's offices.

Entertainment & Lighting

The standard treatment time of 60 – 90 minutes can have a positive impact. Interior lighting provides a comfortable environment, and the multiple viewport windows ensure a bright and open atmosphere throughout every session.

For Practitioners

Our Hyperbaric Chamber is designed to be easily controlled and allows you to be in constant contact with users. The ease of operation requires very little training, and sessions can be easily managed by staff. Includes Quick Tips guides for usage and ongoing customer support. Fast shipping to your door by FedEx or DHL.

Ergonomic Chamber Control

The user-friendly control system provides internal and external dual pressure display allowing pressure readings at any time from inside and outside. Redundant pressure regulating valves add an additional layer of safety throughout every session.

Certification:

CE certified. ISO 9001 sets out the criteria for a quality management system. ISO 14001 sets out the criteria for an environmental management system. ISO 13485 specifies requirements for a quality management system where an organization needs to demonstrate its ability to provide medical devices and related services that consistently meet customer and applicable regulatory requirements.

Emergency & Preventative Measures

The hyperbaric chamber is equipped with numerous safety features for peace of mind:

1. Emergency valve on the chamber speeds depressurization in an emergency; user presses interior release button to depressurize quickly and exit.
2. Unique pressure relief valve design makes depressurization easier and more controlled.
3. Redundant pressure regulating valves dual protection for safe pressure management at all times.
4. Internal pressure gauge user can observe chamber pressure from inside at any time.
5. External pressure gauge attendant can monitor pressure from outside simultaneously.
6. Internally and externally operable pressure release valve self-sustaining operation without outside assistance.
7. Five carbon filters remove fine contaminants and provide consistently clean air throughout every session.
8. CO₂ expulsion system quiet high-volume air compressor designed to expel CO₂ effectively.
9. Antistatic earthing mat eliminates static charge build-up for a safe, grounded environment.
10. 2-zipper system with center flap leak prevention and dramatically reduced stress on the zipper for long-term durability.

Operational Costs: There are no consumables required to operate this hyperbaric chamber, only electricity. Oxygen concentrator 500W × 2 = 1,000W; air compressor included in all-in-one unit; air cooler 300W. Per hour cost for electricity is roughly 39 cents per hour.

Specifications

Oxygen Health Systems 4-Person Multiplace Soft Shell | 1.3 ATA

Full Specifications

4 personsmax capacity
1.3 ATAoperating pressure
210 LPMtotal air flow
6′W × 8′Hchamber size
ComponentChamber Capsule
Exterior size2m × 2.53m
Interior size2m × 2m
Operating pressure: 1.1–1.3 ATA | 4.3 PSI variable pressures
Maximum capacity: 4 persons 6 feet wide × 8 feet tall interior
Material: medical-grade non-toxic 44 oz TPU Dacron polyester (NASA space suit material)
Heat-welded seams no toxic glues used
U-Style door for easy entry and exit ideal for larger adults and mobility-challenged users
Exterior metal frame for sturdy structural support
Proprietary 2-zipper system with center flap leak prevention and reduced zipper stress
4 viewport windows for light and visibility
Antistatic earthing mat included
Multiple spare ports for future expansion
Can be operated continuously ideal for clinics and doctor's offices
Can be operated independently without a 2nd person
Voltage: 110V | CE, ISO 9001, ISO 14001, ISO 13485 certified
3-year warranty on chamber; 20-year window warranty; 1-year hardware warranty
ComponentAll-In-One Oxygen System (×2 units)
Air compressor210 LPM total
O₂ concentrator10 LPM each
Two all-in-one 10 LPM medical-grade oxygen generator/compressor units included
Total compressed air input: 210 LPM
Air compressor unit size: 54 × 36 × 63 cm | Weight: 18 kg
Oxygen concentrator: 10 LPM | 28 kg | 500W each
Delivers 95%+ oxygen under pressure via face mask
Oil-free air compressor no contamination of breathing air supply
Five carbon filters remove fine contaminants for consistently clean air
Unique CO₂ prevention system expels CO₂ through pressure relief valves
18–20 PSIG oxygen output at 95% purity FDA approved concentrators
Ionization technology elevates negative ions inside the chamber
ComponentAir Cooling System
Air cooler5 kg | 300W
AC systemDual-action included
Air conditioning system included as standard dual-action interior cooling and humidity removal
Air cooler: 5 kg | 300W integrated free of charge
Condenser on the inside of the chamber + cooling unit on the outside
We are the only hyperbaric manufacturer to offer a built-in AC system at this price point
Operational costs approx. $0.39 per hour only electricity required to run the all-in-one oxygen/compressor units and air cooler. No consumables needed.

 

Items Included In The Order

4-Person Multiplace What's Included

Free Inclusions

Everything required to operate the chamber smoothly is included. Medical equipment needs to work from day one ensuring a positive experience for every user from the very first session.

Extra-strength, non-toxic chamber capsule 4-person capacity

Medical-grade 44 oz TPU Dacron polyester (NASA space suit material) with heat-welded seams and no toxic glues

Two all-in-one 10 LPM oxygen generator/compressors

210 LPM total compressed air oil-free, high-volume units providing 95%+ oxygen purity via face mask at 18–20 PSIG

Air conditioning system

Dual-action AC included as standard condenser inside the chamber, cooling unit outside; consistent temperature control throughout every session

Air cooler integrated free

300W air cooler integrated at no additional cost removes humidity and reduces air temperature during sessions

Exterior metal frame

Sturdy but lightweight external frame provides greater chamber structure support and prevents shifting during use

Memory foam mattress

Made for greater comfort during sessions supports users in a relaxed lying position for the full session duration

Noise muffler

Designed to reduce compressor noise inside the chamber for a quieter, more relaxing multiplace session environment

Oxygen mask and headset

Included for all users to breathe oxygen directly at 95%+ purity during every session

Antistatic earthing mat

Eliminates static charge build-up during sessions provides a safe, grounded environment inside the chamber

Five carbon filter system

Removes fine contaminants and provides consistently clean, purified air throughout every session

Ionization technology negative ion generator

Elevates negative ions inside the chamber promotes immune vitality and provides cardiorespiratory benefits synergistic with HBOT

Multiple spare ports for future expansion

Built-in expansion ports allow secondary devices or future accessory upgrades to be connected at any time

Quick Tips guides & ongoing customer support

Usage guides included for quick setup ongoing US-based customer and technical support available for any questions

Operational training videos

Video training included for easy setup and operation complete guidance from day one with no extra training required

Patient experience highlights

Capacity & spaceUp to 4 users simultaneously in a 6′ × 8′ interior U-Style door for easy entry and exit for all body types
Cooling & comfortAC system, air cooler, and dehumidifier all included consistent temperature control unique in this price range
Safety10-point safety system including redundant pressure valves, CO₂ expulsion, antistatic earthing mat, and emergency depressurization
International sales available systems configured to your international voltage and plug type requirements upon request. Fast shipping by FedEx or DHL.

Standard inclusion ×2 units

Oxygen Concentrator

Oxygen Concentrator 10 LPM Drive DeVilbiss
95%+oxygen purity
10 LPMflow rate each
500 Wmotor power each
18–20 PSIGpressure output

Units includedTwo all-in-one 10 LPM oxygen concentrators included as standard no additional cost
Oxygen purity95%+ stable purity at 10 LPM reaches full operating purity within just 5 minutes
Pressure output18–20 PSIG suitable for high-pressure hyperbaric chamber applications
Motor500W heavy-duty motor per unit built for long-lasting durability and continuous daily use
Weight28 kg per unit
TechnologyPSA molecular sieve continuous flow oxygen production; non-toxic, eco-friendly; no oxygen tank required
CertificationFDA approved certified for medical and home oxygen therapy use
FDA Approved 95% O₂ purity No oxygen tank required 500W heavy-duty motor PSA molecular sieve 2 units included

Standard inclusion

Air Compressor

Hyperbaric Air Compressor All-In-One
210 LPMtotal airflow (×2)
Oil-freedesign
5-stagecarbon filtration
CO₂ expelsystem

AirflowTwo all-in-one compressor units 105 LPM each, 210 LPM total for the 4-person chamber
Unit size54 × 36 × 63 cm per unit | Weight: 18 kg per unit
DesignOil-free, quiet high-volume air compressor no lubricants that could contaminate the breathing air supply
FiltrationFive carbon filters designed to remove fine contaminants and provide consistently clean, pure air
CO₂ systemUnique design expels CO₂ through pressure relief valve prevents dangerous CO₂ build-up during multiplace sessions
210 LPM total airflow Oil-free Quiet operation 5-stage carbon filters CO₂ expulsion system 2 units included

Standard inclusion

Internal & External Pressure Gauges

Internal and External Pressure Gauges
Dualgauge system
High precisionaccuracy
Internal and external high-precision pressure gauges allowing accurate observation and control of pressure from both inside and outside the chamber at all times. Users inside and attendants outside can both monitor pressure simultaneously.

External gaugeMounted outside the chamber for easy monitoring by an attendant or practitioner during sessions
Internal gaugeMounted inside the chamber so any user can monitor pressure independently at all times
PrecisionHigh-precision readings allow accurate control of pressure changes at any time during a session
BenefitFull dual visibility internal/external pressure display allowing pressure reading anytime from inside and outside

Safety system standard inclusion

Emergency Pressure Relief Valve

Emergency Pressure Relief Valve
Patenteddesign
Interioruser-operated
Instantdepressurization

DesignPatented emergency relief valve unique pressure relief valve design makes depressurization easier and more controlled
OperationAny user presses the interior release button from inside the chamber no tools or external assistance required
RedundancyInternally and externally operable pressure release valve full self-sustaining operation without outside assistance
Redundant valvesRedundant pressure regulating valves provide added safety dual-protection for the 4-person chamber environment
ActionInstantly depressurizes the chamber, allowing all users to open the zippers and exit quickly and safely
Safety first in any emergency, a single press of the interior button initiates rapid pressure relief, putting full control in the hands of the users inside the chamber.

Optional Add Ons

Optional add-on

Purify-One UV Wand (Price - $399.00)

Purify-One UV Disinfection Wand
10+ yearsuseful life
UV-C & UV-Adual wavelength
8 Wwattage
~90 minsbattery life

Size14.5″ × 1.625″ × 1.25″ slim, handheld design easy to use in any space
Weight6.5 oz lightweight enough for extended use without fatigue
WavelengthsUV-C: 270–280 nm / UV-A: 380–405 nm dual-spectrum disinfection for superior pathogen elimination
Irradiance12 mJ / cm² industry-leading output for effective surface disinfection
VoltageDC 5V / 2A standard USB charging
Wattage8 W efficient power usage for consistent disinfection performance
Timer60-minute built-in timer set and go for hands-free operation
Battery2,000 mAh approximately 90 minutes of continuous use per charge
ColorWhite
Warranty1 year from date of purchase
ApplicationsHospitals, hospitality, clinics, homes, education, restaurants, retail, and day-to-day personal use
Best-in-class disinfection 10+ year lifespan Dual UV-C & UV-A Hospital grade Cordless & portable 60-min timer

Warranty

Oxygen Health Systems

Warranty

3 Years Warranty
3 yearschamber warranty
20 yearswindow warranty
1 yearhardware warranty

Coverage summary

Full 3-year coverage on the main chamber body. All soft chamber windows are covered for 20 years. Hardware including the oxygen concentrators, air conditioner, air cooler, and air compressor units are covered against defects for 1 year from the date of purchase.

Warranty certification

We pride ourselves on painstaking accuracy and crafting our equipment with the very highest quality raw materials. Based on 7 years of performance data, we know with a high degree of certainty that manufacturing defects, if any, are most likely to occur within the first 12 months. Should faulty materials or workmanship be found, we first provide troubleshooting guidance. If the issue remains unresolved, we provide complete replacement of all affected components at our sole discretion.

The warranty does not cover damage resulting from misuse, overuse, mishandling, unauthorized modification, sheathing change, inadequate maintenance, improper equipment handling, or user operation.

FAQs

Can this chamber be operated without a second person?

Yes. This chamber can be operated independently without the assistance of a second person. Internal controls allow users to manage pressurization, monitor the session, and initiate depressurization without any outside help.

How many people can use this chamber at once?

This chamber is designed for up to 4 people simultaneously. With a 6-foot wide and 8-foot tall interior, it comfortably accommodates multiple users for shared hyperbaric oxygen therapy sessions ideal for families, clinics, and wellness centers.

What pressure does this chamber operate at?

This chamber supports variable pressures from 1.1 to 1.3 ATA (4.3 PSI). The pressure is adjustable, allowing the operator to select the appropriate level for each session's therapeutic protocol.

Is air conditioning included?

Yes, an air conditioning system is included as a standard feature with this multiplace chamber. A dual-action system provides consistent interior cooling through both air-side and water-cooled condenser cooling. An air cooler and dehumidifier are also integrated at no additional cost. We are the only hyperbaric manufacturer to offer an AC system designed specifically for hyperbaric oxygen chambers.

Are oxygen concentrators included?

Yes. Two all-in-one 10 LPM medical-grade oxygen generator/compressor units are included at no additional cost, providing a total compressed air input of 210 LPM and delivering 95%+ oxygen purity via face mask at 18–20 PSIG. No external oxygen tanks are required.

What materials is this chamber made from?

The chamber is constructed from medical-grade non-toxic 44 oz TPU-embedded Dacron polyester the same material used by NASA in space suits. Seams are heat-welded and no toxic glues are used. The proprietary 2-zipper system with center flap provides leak prevention and reduces stress on the zippers for long-term durability.

Is this chamber safe for clinic and continuous use?

Yes. This chamber is designed to be operated continuously, making it ideal for doctor's offices, clinics, and wellness centers. It includes a 10-point safety system: redundant pressure regulating valves, five carbon filters, CO₂ expulsion system, antistatic earthing mat, emergency interior depressurization valve, internal and external pressure gauges, and internally/externally operable pressure release valve.

Do you ship internationally?

Yes. We sell internationally and can provide our systems to your international voltage and plug type requirements. Fast shipping is available worldwide by FedEx or DHL. Contact us for international shipping quotes and voltage configuration options.

Do you ship to Alaska & Hawaii?

Yes, we absolutely ship to Alaska and Hawaii. Please contact us with your full address for a shipping quote. Call 251-292-1169 or email support@mediriser.com for shipping assistance.

Do I need to install firewalls for using this system?

No additional firewalls are required. Our system uses oxygen concentrators rather than compressed oxygen tanks, which means the net room oxygen level does not increase during operation. The oxygen generated is delivered directly into the chamber and the evacuated air redistributes into the room at the same or lower oxygen percentage as it started making it safe for standard indoor installation without special ventilation requirements.

How do oxygen molecules get deeper into your tissues with Hyperbaric Oxygen Therapy?

Under increased pressure, oxygen molecules shrink and can squeeze through constricted blood vessels, inflamed tissue, across the blood-brain barrier, and into lymph nodes, cerebrospinal fluid, and the musculoskeletal system. This is analogous to CO2 dissolving into soda under pressure when the can is opened, CO2 expands and you see the fizz. The same principle applies to oxygen molecules under hyperbaric pressure: they dissolve into the blood plasma and are delivered to tissues starved of oxygen, supporting cellular repair and optimal activity. Oxygen is the final electron acceptor in the Electron Transport Chain where all ATP is produced. Without oxygen we cannot make energy for our brain, organs, or tissue. The more oxygen delivered to our tissues, the healthier, more energetic, and mentally well we feel.

If for any reason you are not completely satisfied with your purchase, you may return any Hyperbaric Chamber Purchase within 14 Days of purchase.

The following rules apply:

Products must be returned in the original packaging and in a new and resellable condition. Refunds will be determined by incoming inspection and if not returned or packed properly, the refund may be denied.
Shipping Fees are non-refundable.
All returns must be made via our Return Procedure by filling out an RMA form in the MY ACCOUNT section or by requesting assistance from our sales team.
There are few non-returnable products & services that may be offered on our website. It will indicate clearly in the product description if a different return policy applies.
If the return of an item was caused by an error on our part or a manufacturer’s part, Oxygen Health Systems will cover the shipping fees.
After 14 Days, any returnable chamber will have a 20% restocking fee, if Oxygen Health Systems approves the return. Please email us with any questions.
DISCLAIMER: Depending on your building/home/office floor-plan, corridor, entryway width/dimension, turns, etc. you may need to consult your building/facility manager, renovation or construction specialist to ensure that there are no further space/maneuvering restrictions in bringing your hyperbaric chamber at its intended destination. OHS is not responsible for any errors.
RETURN PROCEDURE

To return a product, you must first request a Return Merchandise Authorization (RMA) that is located in the MY ACCOUNT section next to each order item that you want to return. The RMA form will include an exact return address and detailed instructions on how to return a product. Please allow 24 to 72 hours for processing your claim.

The customer is responsible for all shipping costs (including warranty products) associated with any returns.
DEFECTIVE, DAMAGED, OR INCORRECT PRODUCTS

We all know that accidents happen sometimes. If your product(s) have arrive defective, damaged, or simply incorrect, please contact our customer service department, at support@mediriser.com or call 251-292-1169 as soon as possible to with speak with our customer service. Be sure to have your order number ready for faster processing and leave a detailed message if possible. Please do not attempt to use, open or handle the item, especially if it is broken glass! We will send you a replacement item and provide you with a prepaid return label to return the defective item once we have received your request. In some cases the item may not need to be returned. Product(s) must be returned to us within 30 days. If the damage was caused by a shipping courier, we will schedule a damage pick up by the courier.

When a replacement item is requested to be shipped prior to the return of original merchandise, we may need to receive the original merchandise return, before we can ship the replacement. This is a case by case scenario and each defective, damage or incorrect product return process may be different.

ORDER CANCELLATIONS

Orders can not be cancelled once the order confirmation is received.

When you request a cancellation of an order or item it may take up to 72 hours to process your cancellation claim. This process may involve voiding orders in computer systems, removing items from backorder logs, having operations personnel pull items from production schedules and sometimes stopping orders at the shipping dock. Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of your cancellation.

REFUNDS & CREDITS

After we accept your return, you will be issued a refund via the same payment method as you had originally used to place the order (Credit Card, ACH and Check). The refund amount will be composed of the original purchase price minus shipping charges. You will be sent an email confirming receipt of the return and your credit. Please allow an additional 5-7 days for the credit to appear on your account.

At Medriser, we're committed to ensuring your order reaches you in a timely manner. Our shipping policy guarantees that your order will be processed and dispatched within 1-2 business days from the date of purchase. Once your order is shipped, you can expect it to arrive at your doorstep within 3-5 business days. We partner with reliable shipping carriers to ensure safe and efficient delivery of your medical supplies and healthcare products. For any inquiries regarding your order status or shipping, please don't hesitate to contact our customer care team for assistance.

Payment Policy:
Medriser offers convenient payment options to make your shopping experience seamless. We accept major credit cards, including Visa, Mastercard, American Express, and Discover, as well as PayPal for secure online transactions. Your payment information is encrypted and protected to ensure your privacy and security. For any payment-related inquiries or assistance, please feel free to reach out to our customer care team. We're here to help make your purchase process as smooth and hassle-free as possible.

Our Price Matching Policy

At Mediriser, we are dedicated to offering you the most competitive prices online. We maintain strong partnerships with our suppliers to establish minimum advertised pricing guidelines for all our competitors. This means that every other online store selling the same product is expected to offer it at the same price.

Price Match Guarantee

If, within 14 days of your purchase, you discover another online store offering a lower price for the same product, please bring it to our attention. We will promptly contact the brand to ensure they comply with the minimum advertised price policy. If you qualify for a refund, we will credit the price difference back to your credit card.

Your Confidence Matters

We want you to shop with absolute confidence, knowing that you are receiving the best possible price for the product. If you find that our own website has reduced the price of the item you ordered within 14 days of your purchase, we will also refund the price difference.

Requesting Your Partial Refund

To request a partial refund, simply follow these steps:

Email us at support@mediriser.com with links to the product on both our website and the other dealer's website where you found the price difference.

Ensure that you make this request within 14 days from the date of your order.

We will process the credit accordingly and ensure that you receive the best deal possible.

Limitations of Our Price Match Guarantee

While we are committed to providing competitive pricing, our Price Match Guarantee does come with certain limitations:

You must purchase the item from our website before requesting the Price Match Guarantee.

Promotions such as rebates, holiday sales, and "buy one, get one free" offers do not qualify.

The item must be in stock on the competitor's website and be sold as brand new.

The competitor must be an online store and may not have a physical retail location.

The website in question cannot be a discounter or auction site (e.g., eBay, Overstock, Walmart, Amazon, etc.).

The competitor must be an Authorized Retailer of the product.

Our Price Match Guarantee includes both the item price and shipping charges but excludes sales tax.

Contact Us for Price Match Inquiries at support@mediriser.com

If you have any questions or wish to confirm whether we can price match a product before making your purchase, please reach out to us. We are here to assist you in securing the best deals on the products you need. Your satisfaction and savings are our top priorities at Mediriser.

Free Shipping

On all standard orders

Give Us A Call

+1 251-292-1169

Chat With Us

We offer 24-hour chat support

Secure Transactions

256-Bit SSL secured checkout