Original price
$16,990.00
-
Original price
$16,990.00
Original price
$16,990.00
Current price
$9,980.00
$9,980.00
-
$9,980.00
Current price
$9,980.00
| /
✓
Authorized
Oxygen Health Systems
Dealer
✓Lowest Price Guaranteed
✓Certified: ISO 9001, ISO 14001, ISO 13485
✓Questions? Call our Team: +1 251-292-1169
🏷️ LIMITED TIME OFFER! Use Code: MED8 for 8% Off
(Not valid on all brands)
No reviews
FDA Disclaimer
At Mediriser, we are committed to transparency and believe in empowering you with the information you need to make informed decisions. Some products we sell are FDA-approved, while others are not intended or marketed as FDA-approved medical devices.
1. FDA-Approved vs. Non-FDA-Approved Products
Our curated selection of medical, mobility, and wellness equipment includes products that are FDA-approved for specific medical uses, ensuring your safety and peace of mind.
Other products — including certain soft hyperbaric chambers and wellness technologies — may be FDA-registered but not FDA-approved. Registration with the FDA indicates that the manufacturer has notified the FDA of the product’s existence; it does not imply approval or endorsement for medical use. In contrast, FDA approval means the product has undergone rigorous testing and evaluation by the FDA and is deemed safe and effective for its intended use.
2. Hyperbaric Chambers & Off-Label Use
The FDA has approved soft hyperbaric chambers operating at 1.3 ATA for treating altitude sickness.
Any use beyond this — including general wellness, recovery, performance enhancement, or treatment of chronic conditions — is considered off-label, even if the chamber is FDA-registered. Off-label use refers to using a product in a way that is not approved by the FDA. While it is not illegal, it is important to understand that the safety and effectiveness of the product for such uses have not been evaluated by the FDA.
3. No Medical Claims
Unless explicitly stated otherwise for specific FDA-approved products:
The FDA has not evaluated the products and statements on Mediriser.com.
Our equipment is not intended to diagnose, treat, cure, or prevent any disease.
Content on this website is for informational and educational purposes only and is not a substitute for medical advice.
4. Consult a Healthcare Professional
We strongly encourage all customers to speak with their healthcare provider before:
Starting any new recovery or wellness regimen
Using any equipment sold on our site
Treating existing conditions or symptoms
This is especially important for individuals who are pregnant, have pre-existing conditions, or are using prescription medications.
5. Results May Vary
Individual experiences may differ based on health status, product use, and lifestyle factors. No claims are made regarding guaranteed outcomes.
6. Limitation of Liability
Mediriser and its affiliates are not liable for any harm or adverse effects resulting from using or misusing our products. Users assume full responsibility for their decisions.
7. Questions?
If you have any questions about the FDA status of a specific product or would like further clarification:
Vertical Mini Sitting Chamber - Small Footprint, 1.3 ATA, Standard Chair Inside
This Vertical Mini Hyperbaric Chamber has a very small footprint as a vertical sitting chamber with the capability to put a standard chair inside. The unit measures 29 inches wide by 55 inches deep with a height of 5 feet 4 inches - perfect for small offices and apartments with limited space. Despite its compact dimensions, it delivers the same medical-grade 10 LPM oxygen generator producing 96% oxygen purity as the larger chamber models, able to deliver compressed oxygen at 1.3 ATA (32 KPA) with options to upgrade to 1.4 ATA or 1.5 ATA.
Our test systems have been running for over 5 years continuously at over 3 times the pressure - that is over 43,000 hours with no faults. The hyperbaric chamber reservoir bag is rated to last a whopping 39 years if used 1 hour per day, 5 days per week. Built to last 25 to 30 years with durable triple heat-welded seams, medical-grade materials, and a proprietary 2-zipper system with center flap.
This hyperbaric chamber can be operated alone for home use.
No prescription is required for this Hyperbaric Chamber. As with all hyperbaric chambers, we advise you to consult your doctor.
Compact Design - 29" Wide x 55" Deep x 5'4" Tall
This is the smallest-footprint vertical sitting chamber in the range, with a 29-inch width allowing it to fit in spaces where standard hyperbaric chambers cannot. Despite its compact size, the 55-inch depth and 5 foot 4 inch height provide ample room for one person to sit comfortably with a standard chair inside. Remote control, 2-hour timer, two-way LCD display, intercom, power outage alarm, and attendant buzzer are all included as standard.
96% Oxygen Purity and Dehumidifier Included as Standard
This chamber offers an upgraded 10 LPM oxygen generator producing 96% oxygen purity for the most effective treatments. Our system offers a dehumidifier at no additional cost to make sessions more comfortable. The system has been built with safety in mind, offering an emergency pressure relief button, dual pressure gauges inside and outside, and redundant pressure regulators to maintain consistent circulatory airflow throughout every treatment.
Industry-First Triple Reinforced Silicone-Sealed Zipper System
The 2-layer zipper with center flap provides an anti-leak design with double protection and reduces stress on the zipper system for many years of usage. The outer cover zips up for additional chamber support. Industry-first highly sealed triple-reinforced fasteners sealed with silicone completely prevent leakage for years to come.
Certifications
ISO 9001 sets out the criteria for a quality management system. ISO 14001 sets out the criteria for an environmental management system. ISO 13485 specifies requirements for a quality management system where an organization needs to demonstrate its ability to provide medical devices and related services that consistently meet customer and applicable regulatory requirements.
Emergency and Preventative Measures
A patented emergency relief valve allows the user to press the release button from inside the chamber to depressurize quickly and exit safely. Dual pressure relief valves at the foot of the chamber and redundant pressure regulators maintain consistent circulatory airflow throughout every session. Both internal and external high-precision pressure gauges allow the patient and a person outside to monitor internal pressure simultaneously. Power outage alarm system and attendant buzzer included as standard.
Operational Costs: Total system 1,460 W. Oxygen concentrator 640 W, compressor 520 W, dehumidifier 300 W. Additional upgrade for the air conditioner 550 W. 110-120V standard, 220V available on request.
Specifications
Oxygen Health Systems - Vertical Mini Sitting | 1.3 ATA Base
Full Specifications
29"W x 55"Dfootprint
5'4"chamber height
1.3 ATAbase pressure
96%oxygen purity
ComponentChamber
Weight30 lbs
Size29"W x 55"D x 5'4"H
*1.3 ATA | 4.3 PSI | 32 KPA base pressure | 1.4 ATA and 1.5 ATA upgrades available
*Dimensions: 29" wide x 55" deep x 5'4" tall - smallest-footprint vertical sitting chamber in the range
*44 oz medical-grade TPU/PET Dacron material - certified non-toxic, NASA-grade sourced from Germany
*Triple heat-welded seams - no toxic glues used or required
*2-layer zipper with center flap plus outer cover zipper - industry-first triple-reinforced silicone-sealed fasteners
*3 double-deck 1 mm thick windows - ambient light from multiple angles
*Internal metal frame with bolsters - prevents rolling; eases entry and exit
*Wheels included for easy indoor movement
*Top entry | Can be operated independently without a 2nd person
*Remote control, 2-hour auto timer, and two-way LCD display included standard
*Intercom, power outage alarm, and attendant buzzer included standard
*Tested 43,000+ hours at 3x operating pressure with no faults | rated 39-year bag life
*Standard chair fits inside - compatible with regular home or office seating
*3-year warranty | 20-year window warranty | 7/7 lifetime support
ComponentAir Compressor
Weight40 lbs
Size7.9"L x 19.7"W x 23.6"H
*420 W oil-free, low-noise design
*72 LPM high-volume airflow output
*Adjustable pressure control system
*5-stage activated carbon filtration to micron level
*Dual pressure relief valves at foot - CO2 exhaust design prevents buildup
Operational costs: electricity only - concentrator 640 W, compressor 520 W, dehumidifier 300 W. No consumables required. AC upgrade adds 550 W.
Features
Vertical Mini Sitting 1.3 ATA - Feature Summary
Features
◆Smallest-footprint vertical sitting chamber - 29"W x 55"D x 5'4"H - fits standard office chairs and small spaces
◆96% oxygen purity from Drive DeVilbiss FDA-approved 10 LPM oxygen generator under pressure
◆1.3 ATA base with pressure upgrades available to 1.4 ATA ($1,849) and 1.5 ATA ($3,910)
◆Dehumidifier included at no additional cost - a $700 value standard in every order
◆Remote control, 2-hour auto timer, and two-way LCD display all included standard
◆Intercom communications system, power outage alarm, and attendant buzzer included standard
◆Interior controls to lock zipper and start pressurization without any 2nd person
◆3 double-deck 1 mm thick windows for ambient light and monitoring from multiple angles
◆Emergency pressure relief button - press from inside for rapid safe depressurization
◆Dual internal and external high-precision pressure gauges - simultaneous monitoring
◆Triple heat-welded seams with industry-first triple-reinforced silicone-sealed fasteners
◆44 oz medical-grade TPU/PET Dacron - NASA-grade, sourced from Germany - non-toxic, phthalate-free
◆Internal metal frame with bolsters and wheels for easy positioning and no rolling
◆Negative ion unit included - pure oxygen with negative ions, supports immune system
◆43,000+ hours tested at 3x operating pressure with no faults - 39-year rated reservoir bag
Everything required to begin therapy is included as standard. No additional equipment purchases needed for your first session.
➤
Chamber Capsule (29"W x 55"D x 5'4"H)
Compact vertical sitting design - standard chair fits inside - 3 double-deck windows - triple heat-welded seams - industry-first silicone-sealed zipper system
➤
Oil-Free Air Compressor (72 LPM)
420 W ultra-quiet unit | 7.9"L x 19.7"W x 23.6"H | 40 lbs | 5-stage activated carbon filtration | adjustable pressure control | CO2 exhaust design
➤
Drive DeVilbiss 10 LPM Oxygen Concentrator
FDA Approved - 96% purity at 18-20 PSIG | 640 W motor | 15 LPM total flow | PSA molecular sieve | 3-year warranty - See Specifications
➤
Metal Frame with Bolsters and Wheels
Internal metal frame with bolsters prevents rolling and supports easy entry and exit - wheels for easy movement around home or office
➤
Air Dehumidifier (included free)
300 W dehumidifier ships standard with every order - a $700 value at no additional cost, reduces interior humidity for comfortable sessions
➤
Acoustic Muffler
Built-in muffler reduces operational noise inside the chamber for a more relaxed session environment
➤
2 Oxygen Masks, 2 Headsets, and 2 Nasal Cannulas
Complete breathing accessory kit for direct 96% oxygen delivery at pressure during sessions
➤
Communications System (Intercom)
Two-way walkie-talkie intercom for assisted or monitored sessions - stay connected throughout every treatment
➤
LED Interior Lighting System
Built-in LED lighting provides a calming well-lit interior environment throughout every session
➤
Remote Control, 2-Hour Timer, and Two-Way LCD Display
Remote control for unattended operation | incremental auto-controlled timer up to 2 hours | two-way LCD display for full session management
➤
Power Outage Alarm and Attendant Buzzer
Power outage alarm alerts user immediately | attendant buzzer allows user to call for assistance at any time during a session
➤
Finger Pulse Oximeter and Negative Ion Unit
Finger pulse oximeter measures blood oxygen saturation in real time | negative ion unit delivers pure oxygen with negative ions to promote immune vitality
User experience highlights
Smallest footprint29"W x 55"D x 5'4"H - a standard chair fits inside - designed specifically for small offices and apartments where full-size chambers cannot fit
Pressure upgrade pathStart at 1.3 ATA and upgrade to 1.4 ATA ($1,849) or 1.5 ATA ($3,910) - the only chamber in the series offering a 1.5 ATA pressure upgrade option
96% purity standardDrive DeVilbiss 10 LPM at 96% purity - higher than the 95% standard across the range | dehumidifier and all controls included free
Installation services available in most areas (additional fees apply). Video training for easy setup and ongoing customer support included. Call 251-292-1169 or email support@mediriser.com.
Standard inclusion
Drive DeVilbiss 10 LPM Oxygen Concentrator
96%oxygen purity
10 LPMflow rate
640 Wmotor power
18-20 PSIGpressure output
Dimensions13"L x 12"W x 24.5"H | Weight: 42 lbs | Power: 640 W
Oxygen purity96% stable purity at 10 LPM - reaches full operating purity within 5 minutes of startup
Total flow15 LPM total oxygen flow | 70 LPM air flow | 18-20 PSIG output
TechnologyPSA molecular sieve - continuous flow oxygen production; no external oxygen tank required
Motor640 W (10 Amps) heavy-duty motor for long-lasting continuous durability
Competitors charge over $700 for a dehumidifier. The Vertical Mini ships with one as standard in every order.
Power300 W unit included as standard at no additional cost
FunctionReduces in-chamber humidity to keep you comfortable throughout every session
Competitor costOther brands charge over $700 for this as a paid add-on - with the Vertical Mini it ships included as standard
Included free of charge - saves over $700 vs competitor systems. Not to be confused with the optional dual-action Air Conditioning system which provides full temperature control.
Standard inclusion - patented design
Reliable Patented Zipper System
2-layeranti-leak design
Industry firsttriple-reinforced silicone seal
2-layer zipper with center flap provides anti-leak double protection and reduces stress on the zipper for many years of usage. The outer cover zips up for additional chamber support. Triple-reinforced fasteners sealed with silicone - the first in the industry to offer this system.
System design2-layer zipper with silicone-sealed center flap on the chamber body plus outer cover zipper for additional support
InnovationIndustry's first highly sealed triple-reinforced fasteners sealed with silicone - completely sealed to prevent leakage for years
BenefitReduces stress on the zipper assembly - provides many years of continuous usage with no degradation
Standard inclusion
Internal and External Pressure Gauges
Dualgauge system
High precisionaccuracy
High-precision pressure gauges installed both internally and externally - allowing the patient inside and a person outside to monitor chamber pressure simultaneously at any time during a session.
External gaugeMounted outside for easy monitoring by an attendant or caregiver during sessions
Internal gaugeMounted inside so the user can monitor and control pressure independently at all times
BenefitAlways safely view what pressure the chamber is operating at - avoids any possible early exit and subsequent chamber damage
Safety system - standard inclusion
Emergency Pressure Relief Valve
Patenteddesign
Interioruser-operated
Instantdepressurization
DesignPatented emergency relief valve for rapid safe in-chamber depressurization
OperationUser presses the interior release button from inside - no tools or external assistance required
ActionInstantly depressurizes the chamber allowing the user to open the zippers and exit quickly and safely
Additional valvesDual pressure relief valves at the foot of the chamber provide continuous airflow management and CO2 exhaust throughout every session
Safety first - a single press of the interior button initiates rapid pressure relief, putting full control in the hands of the user inside the chamber at all times.
Optional Add Ons
Pressure upgrade - option 1
1.4 ATA Pressure Upgrade
1.4 ATAupgraded pressure
42 KPA5.8 PSI
+33%vs 1.3 ATA
Shortertreatment times
Upgrade pressure1.4 ATA | 5.8 PSI | 42 KPA - a 33% increase over the standard 1.3 ATA base configuration
BenefitIncreased oxygen density allows for shorter treatment times and improved oxygen delivery to tissues compared to 1.3 ATA
Tissue penetrationDenser oxygen at 42 KPA penetrates deeper into tissues for more beneficial treatments
Price - $1,849
Pressure upgrade - option 2 - highest available
1.5 ATA Pressure Upgrade
1.5 ATAupgraded pressure
152 KPA22.05 PSI
+15%vs 1.4 ATA
Highestpressure available
Upgrade pressure1.5 ATA | 22.05 PSI | 152 KPA - approximately 15% more than the 1.4 ATA configuration
BenefitFurther increase in oxygen density means even shorter treatment times and enhanced healing effects - unique to this product
Treatment timePotential reduction in treatment time by another 10-15% compared to 1.4 ATA, along with increased therapeutic benefits
Availability1.5 ATA upgrade is only available on the Vertical Mini Sitting Chamber - not offered on other models in the range
Price - $3,910
Optional - not included standard
Dual-Action Air Conditioning System
~70 Fmaintained temp
300 Wpower
42 lbsweight
Dual-actioncooling system
Dimensions13" x 16" x 22" | Weight: 42 lbs | AC unit spec: 550 W
Voltage110V-120V | 5-6A operating current | 300 W
Cooling action 1Cools incoming compressed air from the compressor - counteracts heat buildup from equipment operation over time
Cooling action 2Routes ice-cold water to an interior condenser providing a significant direct cooling effect inside the chamber
Humidity removalBoth cooling actions work together to remove humidity from the chamber air throughout every session
Internal fanInternal cooling fan also included for additional air circulation
Dual-action coolingInterior condenserHumidity removalInternal fan included~70 degrees maintained
Price - $2,500
Optional add-on
Grounding System
3 itemscomplete kit
Documentedinflammation benefits
Item 1Hyperbaric chamber ground connection port (requires a blank port on the chamber)
Item 2Silver-infused queen size fabric - 70 cm x 200 cm (27.56" x 78.74")
Item 3Rubber mat 35" x 23.5" - usable internally or externally, wipeable with 70% disinfectant after every session
OperationPlug the white wire into the 3rd outlet ground connection to establish your ground connection
BenefitRemoves possible static electricity from the chamber and user during sessions - documented benefits supporting inflammation response positively (See PubMed Article)
Developed for customers in environments conducive to static buildup - provides an additional layer of safety unique to this manufacturer.
Irradiance12 mJ / cm2 industry-leading output for effective surface disinfection
VoltageDC 5V / 2A standard USB charging | 8 W
Timer60-minute built-in timer for hands-free operation
Battery2,000 mAh approximately 90 minutes of continuous use per charge
Color and WarrantyWhite | 1 year from date of purchase
Best-in-class disinfection10+ year lifespanDual UV-C and UV-ACordless and portable60-min timer
Warranty
Oxygen Health Systems
Warranty
3 yearschamber warranty
20 yearswindow warranty
1 yearhardware warranty
Coverage summary
Full 3-year coverage on the main chamber body with a 20-year warranty on all soft chamber windows. Hardware including the oxygen concentrator, air conditioner, dehumidifier, and air compressor is covered against defects for 1 year from the date of purchase.
Based on 7 years of performance data, manufacturing defects are most likely to occur within the first 12 months. Should faulty materials or workmanship be found, we first provide troubleshooting guidance. If the issue remains unresolved, we provide complete replacement of all affected components at our sole discretion.
The warranty does not cover damage resulting from misuse, overuse, mishandling, unauthorized modification, sheathing change, inadequate maintenance, improper equipment handling, or user operation.
FAQs
Can I do HBOT by myself or is it a 2 person job?
Yes, you can use this chamber completely alone. Interior controls allow you to lock the zipper and start pressurization without any assistance. The remote control makes solo operation straightforward throughout every session.
What all do I need with this hyperbaric chamber?
This chamber comes with everything you need to get started - oxygen concentrator, masks, chamber, metal frame, dehumidifier, negative ion unit, muffler, LED lighting, communications system, remote control, LCD display, timer, power outage alarm, attendant buzzer, finger pulse oximeter, and setup manual with ongoing support. No additional major equipment purchases needed.
Do you ship to Alaska and Hawaii?
Yes, we absolutely ship to Alaska and Hawaii. Please email support@mediriser.com or call 251-292-1169 with your full address for a shipping quote.
Do I need to install firewalls for using this system?
No additional firewalls are required. Our system runs the interior of the chamber at 40% oxygen. The oxygen converted from room air into 95% oxygen enters the chamber, and when it evacuates it redistributes into the room at the same or lower percentage as when the session started - the net room oxygen percentage is never increased. This is fundamentally different from hospital-grade chambers that use compressed oxygen tanks, which would raise room oxygen levels if vented indoors.
What are the pressure upgrade options for this chamber?
The Vertical Mini Sitting Chamber offers two upgrade paths. The 1.4 ATA upgrade ($1,849) provides 33% more pressure than the standard 1.3 ATA base, with increased oxygen density for shorter treatment times. The 1.5 ATA upgrade ($3,910) provides approximately 15% more pressure than the 1.4 ATA level, with further increases in oxygen density and potential treatment time reduction of another 10-15%. The 1.5 ATA option is unique to this product and is not available on other chambers in the range.
How do oxygen molecules penetrate deeper into tissues during HBOT?
Under increased atmospheric pressure, oxygen molecules shrink and can squeeze through constricted blood vessels, inflamed tissue, cross the blood-brain barrier, and enter lymph nodes, cerebrospinal fluid, and the musculoskeletal system. This is analogous to CO2 dissolving into soda under pressure - when the can is opened, CO2 expands and you see the fizz. Under hyperbaric pressure, oxygen molecules dissolve into the blood plasma and are delivered to tissues where circulation is diminished. Oxygen is the final electron acceptor in the Electron Transport Chain where all ATP is produced. Without oxygen we cannot make energy for the brain, organs, or any tissue. The more oxygen delivered to our tissues, the healthier, more energetic, and mentally well we feel.
If for any reason you are not completely satisfied with your purchase, you may return any Hyperbaric Chamber Purchase within 14 Days of purchase.
The following rules apply:
Products must be returned in the original packaging and in a new and resellable condition. Refunds will be determined by incoming inspection and if not returned or packed properly, the refund may be denied. Shipping Fees are non-refundable. All returns must be made via our Return Procedure by filling out an RMA form in the MY ACCOUNT section or by requesting assistance from our sales team. There are few non-returnable products & services that may be offered on our website. It will indicate clearly in the product description if a different return policy applies. If the return of an item was caused by an error on our part or a manufacturer’s part, Oxygen Health Systems will cover the shipping fees. After 14 Days, any returnable chamber will have a 20% restocking fee, if Oxygen Health Systems approves the return. Please email us with any questions. DISCLAIMER: Depending on your building/home/office floor-plan, corridor, entryway width/dimension, turns, etc. you may need to consult your building/facility manager, renovation or construction specialist to ensure that there are no further space/maneuvering restrictions in bringing your hyperbaric chamber at its intended destination. OHS is not responsible for any errors. RETURN PROCEDURE
To return a product, you must first request a Return Merchandise Authorization (RMA) that is located in the MY ACCOUNT section next to each order item that you want to return. The RMA form will include an exact return address and detailed instructions on how to return a product. Please allow 24 to 72 hours for processing your claim.
The customer is responsible for all shipping costs (including warranty products) associated with any returns. DEFECTIVE, DAMAGED, OR INCORRECT PRODUCTS
We all know that accidents happen sometimes. If your product(s) have arrive defective, damaged, or simply incorrect, please contact our customer service department, at support@mediriser.com or call 251-292-1169 as soon as possible to with speak with our customer service. Be sure to have your order number ready for faster processing and leave a detailed message if possible. Please do not attempt to use, open or handle the item, especially if it is broken glass! We will send you a replacement item and provide you with a prepaid return label to return the defective item once we have received your request. In some cases the item may not need to be returned. Product(s) must be returned to us within 30 days. If the damage was caused by a shipping courier, we will schedule a damage pick up by the courier.
When a replacement item is requested to be shipped prior to the return of original merchandise, we may need to receive the original merchandise return, before we can ship the replacement. This is a case by case scenario and each defective, damage or incorrect product return process may be different.
ORDER CANCELLATIONS
Orders can not be cancelled once the order confirmation is received.
When you request a cancellation of an order or item it may take up to 72 hours to process your cancellation claim. This process may involve voiding orders in computer systems, removing items from backorder logs, having operations personnel pull items from production schedules and sometimes stopping orders at the shipping dock. Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of your cancellation.
REFUNDS & CREDITS
After we accept your return, you will be issued a refund via the same payment method as you had originally used to place the order (Credit Card, ACH and Check). The refund amount will be composed of the original purchase price minus shipping charges. You will be sent an email confirming receipt of the return and your credit. Please allow an additional 5-7 days for the credit to appear on your account.
At Medriser, we're committed to ensuring your order reaches you in a timely manner. Our shipping policy guarantees that your order will be processed and dispatched within 1-2 business days from the date of purchase. Once your order is shipped, you can expect it to arrive at your doorstep within 3-5 business days. We partner with reliable shipping carriers to ensure safe and efficient delivery of your medical supplies and healthcare products. For any inquiries regarding your order status or shipping, please don't hesitate to contact our customer care team for assistance.
Payment Policy: Medriser offers convenient payment options to make your shopping experience seamless. We accept major credit cards, including Visa, Mastercard, American Express, and Discover, as well as PayPal for secure online transactions. Your payment information is encrypted and protected to ensure your privacy and security. For any payment-related inquiries or assistance, please feel free to reach out to our customer care team. We're here to help make your purchase process as smooth and hassle-free as possible.
Our Price Matching Policy
At Mediriser, we are dedicated to offering you the most competitive prices online. We maintain strong partnerships with our suppliers to establish minimum advertised pricing guidelines for all our competitors. This means that every other online store selling the same product is expected to offer it at the same price.
Price Match Guarantee
If, within 14 days of your purchase, you discover another online store offering a lower price for the same product, please bring it to our attention. We will promptly contact the brand to ensure they comply with the minimum advertised price policy. If you qualify for a refund, we will credit the price difference back to your credit card.
Your Confidence Matters
We want you to shop with absolute confidence, knowing that you are receiving the best possible price for the product. If you find that our own website has reduced the price of the item you ordered within 14 days of your purchase, we will also refund the price difference.
Requesting Your Partial Refund
To request a partial refund, simply follow these steps:
Email us at support@mediriser.com with links to the product on both our website and the other dealer's website where you found the price difference.
Ensure that you make this request within 14 days from the date of your order.
We will process the credit accordingly and ensure that you receive the best deal possible.
Limitations of Our Price Match Guarantee
While we are committed to providing competitive pricing, our Price Match Guarantee does come with certain limitations:
You must purchase the item from our website before requesting the Price Match Guarantee.
Promotions such as rebates, holiday sales, and "buy one, get one free" offers do not qualify.
The item must be in stock on the competitor's website and be sold as brand new.
The competitor must be an online store and may not have a physical retail location.
The website in question cannot be a discounter or auction site (e.g., eBay, Overstock, Walmart, Amazon, etc.).
The competitor must be an Authorized Retailer of the product.
Our Price Match Guarantee includes both the item price and shipping charges but excludes sales tax.
Contact Us for Price Match Inquiries at support@mediriser.com
If you have any questions or wish to confirm whether we can price match a product before making your purchase, please reach out to us. We are here to assist you in securing the best deals on the products you need. Your satisfaction and savings are our top priorities at Mediriser.
Fantastic experience with Mediriser! We purchased a red light therapy bed and an HBOT machine. The customer service team was incredibly responsive throughout the entire process. Even when we hit a few unexpected bumps, they completely took ownership and went above and beyond to resolve them. Highly recommended for wellness equipment!
I am an executive at a large technology company, and represent a major lifestyle society with over 400 members as its president. My passion is lifestyle, and I have spent considerable time and resources testing and reviewing a number of therapies from a large number of suppliers. Allow me to say that the experience I have had so far with this company and product has been beyond exceptional. First, the customer care I have received is second to none. The team has been highly responsive no matter the day and time, provided accurate and sincere information, and given me the feeling of being looked after. I have not experienced this level of customer care before, and I would like to highlight that it is exemplary and I am ultimately grateful for this. Secondly, the product is of high quality and works better than expected. I have become an avid fan of HBOT therapy since I have received your product and would wholeheartedly recommend this therapy and your company to anybody. Lastly, what your company is doing for people is exceptional as it enables the wider public to have a revolutionary therapy at a highly affordable rate at home. Thank you for your time, effort and contribution to society. Please continue this great mission! Best regards.
Clinical excellence in a home setting. The UltraCare XT handles everything my wife's complex care protocol requires. The range of adjustment is excellent and the motor system is quiet and smooth. Her nursing team commented that having proper clinical equipment at home has made a genuine difference in her care quality. Mediriser was professional throughout.
I am really happy with my OxyRevo chamber. The support team was really helpful in helping me assemble it and to get the most out of my chamber. They are well priced for the quality! Thanks!
We recently purchased a Forward 90 from OxyRevo to treat my 5 year old son. He has horrible sores and itching from severe eczema. We had been paying $150 per week to have the HBOT treatment at a clinic. So, we decided it was time to buy an in-home unit. The HBOT treatment works wonders, and heals his skin within a day or two. We did intensive research to find the best system for our family, evaluating a dozen or more systems. After deciding on the OxyRevo Forward90, we couldn't be more happy. The unit is extremely high quality, comfortable, and easy to use. We really like that we can enter the chamber with our son, and sit upright while we watch movies together inside during treatment. The customer service has been top notch. The team even met with me via video chat to walk me through the showroom and explain the device in person before we bought it. We highly recommend OxyRevo, and our son's skin is as clear as it's ever been!
Compact and efficient the Chair Pro is ideal if space is limited. It fits comfortably in my home office and I do sessions during my lunch break. The 1.4 ATA is great for general wellness and cognitive performance. Mediriser was professional and communicative throughout the entire buying process.
The lying position in the Airvida Ultra makes sessions feel like true rest rather than a medical procedure. After six weeks of regular use my inflammation markers have dropped noticeably according to my doctor. The hard shell construction is premium and the 2.0 ATA ceiling gives flexibility for various therapeutic goals. Mediriser handled delivery and setup support perfectly.
The 550lb capacity of the Oasis Expandable was the primary reason we chose it and it handles the load with ease. The hi-low function is smooth and the expandable width means my husband has room to move comfortably. All electric adjustments work reliably. Mediriser was thorough in confirming the capacity and dimensions for our room before we ordered.
