The Seneca 3-person outdoor contemporary sauna features a modern look with a sleek design. This outdoor traditional sauna features a maintenance-free metal roof for a sleek yet durable roof that can withstand harsher climates. The rustic red cedar cabin has a sealed weatherproof finish for protection against the elements. A spacious interior cabin with a deep bench seat and ergonomic backrest make the Seneca the perfect oasis to relax in. This sauna comfortably seats 3 adults or one adult can lay on the bench. The Harvia 6 kW Electric Heater will reach up to 180 degrees Fahrenheit. This sauna includes a cask and spoon for adding water to the heater stones, a hygrometer for measuring humidity levels and a sand timer to monitor your session time. The Seneca is easy to assemble and operate making it the perfect addition to your backyard.
At SunRay we are uncompromising in our commitment to provide quality Infrared saunas that stand the "test of time. Our saunas are designed to be ergonomically and aesthetically pleasing while providing significant health benefits for consumers. We try to ensure maximum comfort in every sauna we sell.
Specifications
-
Roof Dimensions (W x D): 78" x 71"
-
Exterior Product Dimensions (H x W x D): 89" x 61" x 51"
-
Interior Product Dimensions (H x W x D): 75" x 57" x 47"
-
Power: ETL/CSA Certified - Meets all US and Canadian electrical safety standards - Dedicated 220V, 30 amps
Features
- Sealed Weatherproof Cabin
- Metal Roof Protects Against the Elements
- Constructed of Rustic Canadian Cedar for Durability and Strength
- 6kW Harvia Electric Heater with Rocks
- Interior Dome Lighting with Auto Shut Off
- Ergonomic Bench Seating
- Interior and Exterior Lighting
- Sand Timer and Hygrometer for Measuring Steam
- Cask and Spoon Included for Adding Water to Stones
- 7 Year Warranty
Manual
Warranty
This product has a 7-Year Warranty against material and workmanship defects. To make a warranty claim, you need to fill out the registration card and send it with a valid receipt to the address below or email warranty@sunraysaunas.com. However, it's important to note that the manufacturer covers the entire sauna structure, including heating elements, but only covers the radio for 1 year.
You need to provide a receipt for any warranty claim, and you may need to arrange and pay for return shipping.. The warranty does not cover misuse, improper installation, or damage from natural causes. SUNRAY INDOOR SAUNAS ARE NOT FOR OUTDOOR USE. Do not use harsh cleaners or lacquers on the sauna, and do not place it on unapproved surfaces. Surface cracks are normal.
- Do not use lacquers, paints or abrasive cleaners on the sauna.
- Do not place the sauna on non-approved surfaces or in outdoor applications.
- Surface cracks are not considered defects in material or workmanship, as they are considered normal characteristics of all wood."
FAQs
How does infrared sauna work?
Infrared heaters in the sauna emit FAR Infrared heat which is a narrow band of energy within the 5.6 to 15 micron level. This type of energy closely resembles the natural human spectrum so it’s easily absorbed by the body tissue.
The body reacts by sweating profusely which has many health benefits including detoxification, improved blood flow, circulation and weight loss.
Do SunRay Saunas emit EMF?
SunRay, unlike many manufacturers, does not use wires to conduct FAR Infrared heat, rather we apply the perfect thickness of ultra-conductive carbon to an epoxy resin panel activated by positive and negative copper strips on either side.
Laminating the epoxy resin panel results in ultra low EMF levels that are safe for continuous use.
How is the sauna packaged?
SunRay Saunas contain wooden panels that are pre-packaged in cardboard boxes and then placed on a wooden pallet to ensure the sauna arrives without damage.
You can remove the cardboard boxes from the pallet and they will fit through any door size 24” or greater.
Does the sauna come pre-assembled?
SunRay Saunas are not pre-assembled. Furthermore, they arrive in panels which are secured together with screws and metal latches. Assembly takes approximately one hour.
How long does it take to assemble the Sunray Barrett 1 Person Hemlock Sauna HL100K2?
Most sauna models take about an hour to assemble. Two people are required. For more information on the assembly of the unit please see the assembly instructions.
Do you need any special tools to assemble the sauna?
No, the only tool you need to assemble the sauna is a Philips head screwdriver or drill with a Philips head bit.
What voltage does the Sunray Charleston 4 Person Indoor Traditional Sauna HL400TN run on?
All SunRay saunas use UL listed plugs and operate on 110V. Some larger saunas require a non-standard 20 amp plug and require a 20 amp circuit.
Can I place the sauna on the second floor?
Most saunas weigh between 300-400lbs. However, you can place a sauna on the second floor.
Can I use the Sunray Sauna outdoors?
All SunRay Saunas except the outdoor models must be used indoors. They are not suitable for outdoor use.
How do I clean the sauna?
First, unplug the sauna and make sure it is cool before cleaning. To clean the wooden interior of your sauna mix 3 teaspoons of baking soda into a gallon of warm water. Use a towel to wipe down the interior with the baking soda and water mixture.
Next, wipe the sauna down with a wet towel and let dry. You can clean the glass in your sauna with glass cleaner. If you have an outdoor sauna, use a standard garden hose on a low/mist setting to wash out the interior. Therefore make sure to leave the door open so the sauna can dry.
How often do I need to clean the sauna?
The sauna should be cleaned every 6 months or at your discretion if you are using it regularly. Sitting on a towel while in the sauna will capture a lot of sweat and thereby reduce the frequency of cleaning the sauna.
