Original price
$16,990.00
-
Original price
$18,990.00
Original price
$16,990.00
Current price
$9,980.00
$9,980.00
-
$11,839.00
Current price
$9,980.00
| /
✓
Authorized
Oxygen Health Systems
Dealer
✓Lowest Price Guaranteed
✓Certified: ISO 9001, ISO 14001, ISO 13485
✓Questions? Call our Team: +1 251-292-1169
🏷️ LIMITED TIME OFFER! Use Code: MED8 for 8% Off
(Not valid on all brands)
No reviews
FDA Disclaimer
At Mediriser, we are committed to transparency and believe in empowering you with the information you need to make informed decisions. Some products we sell are FDA-approved, while others are not intended or marketed as FDA-approved medical devices.
1. FDA-Approved vs. Non-FDA-Approved Products
Our curated selection of medical, mobility, and wellness equipment includes products that are FDA-approved for specific medical uses, ensuring your safety and peace of mind.
Other products — including certain soft hyperbaric chambers and wellness technologies — may be FDA-registered but not FDA-approved. Registration with the FDA indicates that the manufacturer has notified the FDA of the product’s existence; it does not imply approval or endorsement for medical use. In contrast, FDA approval means the product has undergone rigorous testing and evaluation by the FDA and is deemed safe and effective for its intended use.
2. Hyperbaric Chambers & Off-Label Use
The FDA has approved soft hyperbaric chambers operating at 1.3 ATA for treating altitude sickness.
Any use beyond this — including general wellness, recovery, performance enhancement, or treatment of chronic conditions — is considered off-label, even if the chamber is FDA-registered. Off-label use refers to using a product in a way that is not approved by the FDA. While it is not illegal, it is important to understand that the safety and effectiveness of the product for such uses have not been evaluated by the FDA.
3. No Medical Claims
Unless explicitly stated otherwise for specific FDA-approved products:
The FDA has not evaluated the products and statements on Mediriser.com.
Our equipment is not intended to diagnose, treat, cure, or prevent any disease.
Content on this website is for informational and educational purposes only and is not a substitute for medical advice.
4. Consult a Healthcare Professional
We strongly encourage all customers to speak with their healthcare provider before:
Starting any new recovery or wellness regimen
Using any equipment sold on our site
Treating existing conditions or symptoms
This is especially important for individuals who are pregnant, have pre-existing conditions, or are using prescription medications.
5. Results May Vary
Individual experiences may differ based on health status, product use, and lifestyle factors. No claims are made regarding guaranteed outcomes.
6. Limitation of Liability
Mediriser and its affiliates are not liable for any harm or adverse effects resulting from using or misusing our products. Users assume full responsibility for their decisions.
7. Questions?
If you have any questions about the FDA status of a specific product or would like further clarification:
The OXYFLOW wide door sitting and reclining chamber features a unique angled design that makes it a great choice for anyone unable to step into a top entry chamber, or for those who simply want the flexibility to move from sitting fully upright to lying back in relaxation. Its proprietary balanced comfort chair and wide entry make getting in and out effortless, even for less nimble users.
With an 89 inch length, even taller individuals can stretch their legs comfortably. This is one of our best portable hyperbaric chambers, delivering compressed oxygen at 1.3 ATA (32 kPa), with the option to upgrade to 1.4 ATA (42 kPa) for a 33% increase in pressure, shorter treatment times, and denser oxygen delivery.
This hyperbaric chamber can be operated alone for home use.
No prescription is required for this hyperbaric chamber. As with all hyperbaric chambers, we advise you to consult your doctor.
Extra-Long 89″ Sitting & Reclining Design
Plenty of room for one person to sit comfortably in the adjustable reclining chair and still move around. The chair lays fully flat or sits upright at 90 degrees and supports up to 330 lbs. The OXYFLOW sitting chamber is also available in 1.4 ATA (42 kPa), providing a 33% increase in pressure that allows for shorter treatment times and more beneficial treatment as oxygen becomes denser at higher pressure.
Proprietary Adjustable Comfort Chair
The incredible versatility of our proprietary comfort chair allows for adjustments from lying flat to fully upright in fine incremental steps while maintaining balance without tipping over. It offers the same incremental adjustment at the head and the lower portion. No other chamber in the marketplace offers this feature.
Upgraded 10 LPM Oxygen Generator
This chamber offers an upgraded 10 LPM oxygen generator producing 18 to 20 PSIG at 95% to 96% oxygen purity for the most effective treatments. The higher PSIG generator ensures there is no backpressure while delivering a full 10 LPM. A dehumidifier is provided at no additional cost to make every session more comfortable.
Built and Tested to Last
Our systems have been tested over many years, running continuously for over 43,000 hours at much higher pressure with no faults. Some units have been tested at 1.8 ATA without issue. The chamber reservoir is rated to last up to 39 years if used 1 hour per day, 5 days per week, and the units are made to last 25 years or more thanks to durable triple and penta welded seams, medical grade triple layer TPU integrated with PET polyester sourced from Germany, and a proprietary 3-zipper system that reduces load on the zipper for a long lifespan.
Advanced Safety Systems for Peace of Mind
Our system has been built with many safety features in mind. An emergency pressure relief button speeds the exit of the chamber in emergency situations, and dual pressure relief valves provide redundancy of airflow at the foot of the chamber. A power outage alarm, intercom, attendant buzzer, and remote control round out a controlled, secure environment for every session.
Certification:
ISO 9001 sets out the criteria for a quality management system. ISO 14001 sets out the criteria for an environmental management system. ISO 13485 specifies requirements for a quality management system where an organization needs to demonstrate its ability to provide medical devices and related services that consistently meet customer and applicable regulatory requirements.
Call our hotline for any questions! 251-292-1169 to speak to one of our hyperbaric chamber specialists and learn more about our superior hyperbaric chamber systems.
Specifications
Oxygen Health Systems - OXYFLOW Wide Door Sitting & Reclining | 1.3 ATA
Full Specifications
30 lbschamber weight
1.3 ATAoperating pressure
1,460 Wtotal system power
89″ longsitting design
ComponentChamber (Bladder)
Weight30 lbs
Size (deflated)89″L × 41.7″H × 27.5″W
★1.3 ATA | 4.3 PSI | 32 kPa (upgrade to 1.4 ATA | 5.8 PSI | 42 kPa)
★Double-sided 44 oz medical-grade TPU coated PET polyester, certified non-toxic, sourced from Germany
★Four double-deck 1 mm thick windows for light and visibility
★Internal metal frame with anti-roll bolsters
★3-zipper system: two zippers with a center flap plus an outer cover zipper
★Wheels for easy movement around the home or office
★Can be operated independently without a second person
★Two-way LCD display for operation
★Remote control for ease of unattended operation
★Power outage alarm system included
★Intercom communication system and attendant buzzer
★Auto-controlled session timer up to 2 hours
★3-year warranty
ComponentAir Compressor
Weight40 lbs
Size7.9″L × 19.7″W × 23.6″H
★520 W oil-free compressor
★Adjustable pressure control system
★Low-noise design
★Activated carbon 5-stage filtration system
★Filters pollutants down to the micron level
★Exhausts carbon dioxide through the pressure relief valves to prevent build-up
ComponentOxygen Concentrator
Weight42 lbs
Size13″L × 12″W × 24.5″H
★10 LPM Drive DeVilbiss oxygen concentrator
★95% oxygen purity
★18 to 20 PSIG output with no backpressure
★70 LPM air flow
★640 W motor
★FDA approved
★3-year warranty
Built to last 25 years or more. Tested continuously for over 43,000 hours at much higher pressure with no faults, including testing at 1.8 ATA without issue. Includes video training for easy setup and ongoing customer support.
Items Included In The Order
OXYFLOW Sitting Chamber What's included
In The Box
Everything you need to get started is included, along with safety and comfort accessories for a smooth, relaxing session every time.
➜
Chamber capsule
89 inch long sitting and reclining hyperbaric chamber capsule
➜
Oil-free air compressor
Adjustable, low-noise oil-free compressor with multi-stage carbon filtration
➜
Drive Medical DeVilbiss oxygen concentrator
10 liter per minute, 20 PSIG, FDA approved
➜
Negative ion generator system
Delivers pure oxygen with negative ions to help support the body's immune system
➜
Fully adjustable lounge chair
Proprietary balanced chair, lays flat or sits upright, supports up to 330 lbs
➜
Metal frame
Internal metal frame with anti-roll bolsters for ease of entry and exit
➜
Dehumidifier
300 W dehumidifier included as standard for drier, more comfortable sessions
➜
Noise-reducing muffler
Designed to reduce operating noise inside the chamber
➜
Oxygen breathing accessories
2 oxygen masks, 2 headsets, and 2 nasal cannulas to breathe oxygen directly
➜
Finger pulse oximeter
Measures your blood oxygen saturation
➜
Walkie-talkie communication system
Two-way intercom to stay connected throughout your session
➜
Power outage alarm
Alerts you in the event of a power outage
Comfort and session highlights
Comfort chairProprietary balanced chair adjusts in fine increments from flat to upright at the head and lower portion
Free dehumidifierIncluded as standard, saving over $700 compared to systems that charge extra
Session timerAuto-controlled incremental session time up to 2 hours, hands-free operation
Includes a 3-year warranty, video training for easy setup, and ongoing customer support so you can start operating the chamber with confidence.
Standard inclusion
Oxygen Concentrator
95%+oxygen purity
10 LPMflow rate
640 Wmotor power
18–20 PSIGpressure output
Oxygen purityStable 95% purity at 10 LPM, reaching full operating purity within just 5 minutes
Motor640 W heavy-duty motor built for long-lasting durability and continuous daily use
Pressure output18 to 20 PSIG, suitable for high-pressure hyperbaric chamber applications with no backpressure
Air flow70 LPM air flow with 15 LPM total oxygen flow
Provided as a standard option, this dehumidifier saves over $700 in cost compared to systems that charge extra.
InclusionProvided as standard with every order, no additional cost
Power300 W dehumidifier integrated into the system
FunctionReduces in-chamber humidity to keep you comfortable and dry, so you can focus on healing
BenefitDry, comfortable air throughout every session, essential for extended or daily use
Included free of charge, this alone saves you over $700 compared to competitor systems that charge extra for dehumidification.
Standard inclusion
Reliable Patented Zipper System
3-zippersystem
Center flapanti-leak
Siliconesealed
Outer coveradded support
DesignTwo-layer zipper with a center flap for an anti-leak design, providing double protection
DurabilityReduces stress on the zipper system to provide many years of usage
Outer coverAn outer cover zips up for additional chamber support and longer system life
SealingIndustry-first highly sealed triple reinforced fasteners, sealed with silicone and a two-layer zipper to prevent leakage for years
A completely sealed, reinforced zipper system engineered to prevent leakage and extend the lifespan of your chamber.
Standard inclusion
Internal & External Pressure Gauges
Dualgauge system
High precisionaccuracy
High-precision pressure gauges installed both internally and externally, allowing accurate observation and control of pressure from both inside and outside the chamber at all times.
External gaugeMounted outside the chamber for easy monitoring during sessions
Internal gaugeMounted inside the chamber so the user can monitor pressure independently at all times
PrecisionHigh-precision readings allow accurate control of pressure changes at any time during a session
BenefitFull visibility from both inside and outside, giving total peace of mind for user and caregiver alike
Safety system - standard inclusion
Emergency Pressure Relief Valve
Patenteddesign
Dual valvesat the foot
Interioruser-operated
DesignPatented emergency relief valve plus dual pressure relief valves at the foot of the chamber for redundancy of airflow
OperationIn an emergency, the user presses the release button from inside the chamber, no tools or external assistance required
ActionQuickly depressurizes the chamber so the user can open the zippers and exit safely
PurposeEnsures the user can always exit independently with a single press
Safety first. In any emergency, a single press of the interior button initiates rapid pressure relief, putting control entirely in the hands of the user inside the chamber.
Choose any chair for free
Adjustable Comfort Chair Options
Chair finishesAdjustable Green chair, Adjustable Gray chair, or Adjustable PU Leather chair
AdjustabilityLays fully flat or sits upright at 90 degrees in fine incremental steps; supports up to 330 lbs without rear support
Folded sizeFolds to 29″L × 19″W × 28″H; when down, the chair length is 56″
Folding chair surfaceMesh cloth
Stuffing45D high-density compression sponge
RegulatorJapanese brand 14-segment regulator
SkeletonRounded steel
You can choose any of these chairs for free. The OXYFLOW comes standard with our proprietary balanced comfort chair.
The external mini frame for hyperbaric chambers provides structural support and stability, helping maintain the chamber's shape and integrity during use, particularly under increased pressure. This frame supports comfort and safety throughout hyperbaric therapy sessions.
Price - $1,890
Optional pressure upgrade
1.4 ATA Pressure Upgrade
1.4 ATA | 5.8 PSI | 42 kPa. A 33% increase in pressure over 1.3 ATA. The increased oxygen density allows for shorter treatment times and improved oxygen delivery to tissues compared to 1.3 ATA.
Price - $1,890
Optional compressor upgrade
Air Compressor - 120 LPM
AirflowOil-free with 120 LPM air flow volume
DesignNon-toxic and eco-friendly, quiet operation
FiltrationSuper adsorption activated filters with double inlet and outlet filter
Price - $300
Optional compressor upgrade
Air Compressor - 160 LPM
AirflowOil-free with 160 LPM air flow volume
Weight88 lbs (43 kg)
Voltage110V–120V
Operating current8.5 amp
Power750 W
Price - $450
Optional add on - not included
Air Conditioning System
Cooling typeWater cooling system, typically maintains temperature at 70 degrees
Weight42 lbs
Size13 × 16 × 22 inches
Voltage110V–120V
Operating current5–6 A
Power300 W
Price - $2,500
We are the only hyperbaric manufacturer to offer an air conditioning system for use with hyperbaric oxygen chambers. This dual-action two-part system places a condenser inside the chamber and the cooling unit outside. It cools the air from the compressor, which can warm up over time, and routes cold water to an interior condenser for a significant cooling effect. Both actions also remove humidity from the chamber air. An internal cooling fan is included.
Optional add on
10 LPM Oxygen Generator - Drive Medical
Purity & outputFDA approved, stable 95% purity at 10 LPM after 5 minutes, 640 W motor, 18 to 20 PSIG
AlarmsPower failure alarm, low voltage alarm, low purity alarm (optional)
Timer60-minute built-in timer for hands-free operation
Battery2,000 mAh, approximately 90 minutes of continuous use per charge
ColorWhite
Warranty1 year from date of purchase
ApplicationsHospitals, hospitality, homes, education, restaurants, retail, and day-to-day personal use
Best-in-class disinfection10+ year lifespanDual UV-C & UV-ACordless & portable60-min timer
Price - $399
Warranty
Oxygen Health Systems
Warranty
3 yearschamber warranty
20 yearswindow warranty
1 yearhardware warranty
Coverage summary
Full 3-year coverage on the main chamber body, with a 20-year warranty on all soft chamber windows. Hardware including the oxygen concentrator, air conditioner, dehumidifier, and air compressor is covered against defects for 1 year from the date of purchase.
We pride ourselves on painstaking accuracy and crafting our equipment with the very highest quality raw materials. Based on 7 years of performance data, we know with a high degree of certainty that manufacturing defects, if any, are most likely to occur within the first 12 months. Should faulty materials or workmanship be found, we first provide troubleshooting guidance. If the issue remains unresolved, we provide complete replacement of all affected components at our sole discretion.
The warranty does not cover damage resulting from misuse, overuse, mishandling, unauthorized modification, sheathing change, inadequate maintenance, improper equipment handling, or user operation.
FAQs
Can I do HBOT by myself, or is it a 2 person job?
You can use all of our hyperbaric chambers alone. You do not need a second person to get you inside and zipped up. Interior controls let you lock the zipper and start pressurization without assistance.
What do I need with this hyperbaric chamber?
This chamber comes with everything you need to get started: the oxygen concentrator, masks, chamber, setup manual, and our support. It also includes video training for easy setup.
What pressure does this chamber operate at?
The chamber operates at 1.3 ATA (4.3 PSI / 32 kPa) as standard, with the option to upgrade to 1.4 ATA (5.8 PSI / 42 kPa). The 1.4 ATA upgrade provides a 33% increase in pressure for shorter treatment times and denser oxygen delivery.
Is a prescription required?
No prescription is required for this hyperbaric chamber. As with all hyperbaric chambers, we advise you to consult your doctor before use.
How long is a typical session?
The auto-controlled timer allows incremental session times up to 2 hours, so you can set your session and relax without manual monitoring.
Do you ship to Alaska & Hawaii?
Yes, we absolutely ship to Alaska and Hawaii. For an accurate shipping quote, please email us at support@mediriser.com or call 251-292-1169 with your full address.
Do I need to install firewalls for using this system?
No additional firewalls are required. Our system runs the chamber interior at roughly 40% oxygen, and the air evacuated from the chamber redistributes into the room at the same percentage or lower than the room started with, so the net oxygen percentage in the room is never increased. Unlike hospital-grade systems that use dangerous compressed oxygen tanks, this setup is designed for safe indoor operation.
How does hyperbaric oxygen therapy work?
Under increased pressure, oxygen molecules shrink and dissolve into the blood plasma, much like CO2 dissolves into a sealed can of soda. This lets oxygen squeeze through constricted blood vessels and reach inflamed or oxygen-starved tissue, crossing into areas where circulation is diminished. Oxygen is the final electron acceptor in the electron transport chain where ATP is produced, so delivering more oxygen to the tissues supports cellular energy, healing, and overall function throughout the body.
If for any reason you are not completely satisfied with your purchase, you may return any Hyperbaric Chamber Purchase within 14 Days of purchase.
The following rules apply:
Products must be returned in the original packaging and in a new and resellable condition. Refunds will be determined by incoming inspection and if not returned or packed properly, the refund may be denied. Shipping Fees are non-refundable. All returns must be made via our Return Procedure by filling out an RMA form in the MY ACCOUNT section or by requesting assistance from our sales team. There are few non-returnable products & services that may be offered on our website. It will indicate clearly in the product description if a different return policy applies. If the return of an item was caused by an error on our part or a manufacturer’s part, Oxygen Health Systems will cover the shipping fees. After 14 Days, any returnable chamber will have a 20% restocking fee, if Oxygen Health Systems approves the return. Please email us with any questions. DISCLAIMER: Depending on your building/home/office floor-plan, corridor, entryway width/dimension, turns, etc. you may need to consult your building/facility manager, renovation or construction specialist to ensure that there are no further space/maneuvering restrictions in bringing your hyperbaric chamber at its intended destination. OHS is not responsible for any errors. RETURN PROCEDURE
To return a product, you must first request a Return Merchandise Authorization (RMA) that is located in the MY ACCOUNT section next to each order item that you want to return. The RMA form will include an exact return address and detailed instructions on how to return a product. Please allow 24 to 72 hours for processing your claim.
The customer is responsible for all shipping costs (including warranty products) associated with any returns. DEFECTIVE, DAMAGED, OR INCORRECT PRODUCTS
We all know that accidents happen sometimes. If your product(s) have arrive defective, damaged, or simply incorrect, please contact our customer service department, at support@mediriser.com or call 251-292-1169 as soon as possible to with speak with our customer service. Be sure to have your order number ready for faster processing and leave a detailed message if possible. Please do not attempt to use, open or handle the item, especially if it is broken glass! We will send you a replacement item and provide you with a prepaid return label to return the defective item once we have received your request. In some cases the item may not need to be returned. Product(s) must be returned to us within 30 days. If the damage was caused by a shipping courier, we will schedule a damage pick up by the courier.
When a replacement item is requested to be shipped prior to the return of original merchandise, we may need to receive the original merchandise return, before we can ship the replacement. This is a case by case scenario and each defective, damage or incorrect product return process may be different.
ORDER CANCELLATIONS
Orders can not be cancelled once the order confirmation is received.
When you request a cancellation of an order or item it may take up to 72 hours to process your cancellation claim. This process may involve voiding orders in computer systems, removing items from backorder logs, having operations personnel pull items from production schedules and sometimes stopping orders at the shipping dock. Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of your cancellation.
REFUNDS & CREDITS
After we accept your return, you will be issued a refund via the same payment method as you had originally used to place the order (Credit Card, ACH and Check). The refund amount will be composed of the original purchase price minus shipping charges. You will be sent an email confirming receipt of the return and your credit. Please allow an additional 5-7 days for the credit to appear on your account.
At Medriser, we're committed to ensuring your order reaches you in a timely manner. Our shipping policy guarantees that your order will be processed and dispatched within 1-2 business days from the date of purchase. Once your order is shipped, you can expect it to arrive at your doorstep within 3-5 business days. We partner with reliable shipping carriers to ensure safe and efficient delivery of your medical supplies and healthcare products. For any inquiries regarding your order status or shipping, please don't hesitate to contact our customer care team for assistance.
Payment Policy: Medriser offers convenient payment options to make your shopping experience seamless. We accept major credit cards, including Visa, Mastercard, American Express, and Discover, as well as PayPal for secure online transactions. Your payment information is encrypted and protected to ensure your privacy and security. For any payment-related inquiries or assistance, please feel free to reach out to our customer care team. We're here to help make your purchase process as smooth and hassle-free as possible.
Our Price Matching Policy
At Mediriser, we are dedicated to offering you the most competitive prices online. We maintain strong partnerships with our suppliers to establish minimum advertised pricing guidelines for all our competitors. This means that every other online store selling the same product is expected to offer it at the same price.
Price Match Guarantee
If, within 14 days of your purchase, you discover another online store offering a lower price for the same product, please bring it to our attention. We will promptly contact the brand to ensure they comply with the minimum advertised price policy. If you qualify for a refund, we will credit the price difference back to your credit card.
Your Confidence Matters
We want you to shop with absolute confidence, knowing that you are receiving the best possible price for the product. If you find that our own website has reduced the price of the item you ordered within 14 days of your purchase, we will also refund the price difference.
Requesting Your Partial Refund
To request a partial refund, simply follow these steps:
Email us at support@mediriser.com with links to the product on both our website and the other dealer's website where you found the price difference.
Ensure that you make this request within 14 days from the date of your order.
We will process the credit accordingly and ensure that you receive the best deal possible.
Limitations of Our Price Match Guarantee
While we are committed to providing competitive pricing, our Price Match Guarantee does come with certain limitations:
You must purchase the item from our website before requesting the Price Match Guarantee.
Promotions such as rebates, holiday sales, and "buy one, get one free" offers do not qualify.
The item must be in stock on the competitor's website and be sold as brand new.
The competitor must be an online store and may not have a physical retail location.
The website in question cannot be a discounter or auction site (e.g., eBay, Overstock, Walmart, Amazon, etc.).
The competitor must be an Authorized Retailer of the product.
Our Price Match Guarantee includes both the item price and shipping charges but excludes sales tax.
Contact Us for Price Match Inquiries at support@mediriser.com
If you have any questions or wish to confirm whether we can price match a product before making your purchase, please reach out to us. We are here to assist you in securing the best deals on the products you need. Your satisfaction and savings are our top priorities at Mediriser.
Fantastic experience with Mediriser! We purchased a red light therapy bed and an HBOT machine. The customer service team was incredibly responsive throughout the entire process. Even when we hit a few unexpected bumps, they completely took ownership and went above and beyond to resolve them. Highly recommended for wellness equipment!
I am an executive at a large technology company, and represent a major lifestyle society with over 400 members as its president. My passion is lifestyle, and I have spent considerable time and resources testing and reviewing a number of therapies from a large number of suppliers. Allow me to say that the experience I have had so far with this company and product has been beyond exceptional. First, the customer care I have received is second to none. The team has been highly responsive no matter the day and time, provided accurate and sincere information, and given me the feeling of being looked after. I have not experienced this level of customer care before, and I would like to highlight that it is exemplary and I am ultimately grateful for this. Secondly, the product is of high quality and works better than expected. I have become an avid fan of HBOT therapy since I have received your product and would wholeheartedly recommend this therapy and your company to anybody. Lastly, what your company is doing for people is exceptional as it enables the wider public to have a revolutionary therapy at a highly affordable rate at home. Thank you for your time, effort and contribution to society. Please continue this great mission! Best regards.
Clinical excellence in a home setting. The UltraCare XT handles everything my wife's complex care protocol requires. The range of adjustment is excellent and the motor system is quiet and smooth. Her nursing team commented that having proper clinical equipment at home has made a genuine difference in her care quality. Mediriser was professional throughout.
I am really happy with my OxyRevo chamber. The support team was really helpful in helping me assemble it and to get the most out of my chamber. They are well priced for the quality! Thanks!
We recently purchased a Forward 90 from OxyRevo to treat my 5 year old son. He has horrible sores and itching from severe eczema. We had been paying $150 per week to have the HBOT treatment at a clinic. So, we decided it was time to buy an in-home unit. The HBOT treatment works wonders, and heals his skin within a day or two. We did intensive research to find the best system for our family, evaluating a dozen or more systems. After deciding on the OxyRevo Forward90, we couldn't be more happy. The unit is extremely high quality, comfortable, and easy to use. We really like that we can enter the chamber with our son, and sit upright while we watch movies together inside during treatment. The customer service has been top notch. The team even met with me via video chat to walk me through the showroom and explain the device in person before we bought it. We highly recommend OxyRevo, and our son's skin is as clear as it's ever been!
Compact and efficient the Chair Pro is ideal if space is limited. It fits comfortably in my home office and I do sessions during my lunch break. The 1.4 ATA is great for general wellness and cognitive performance. Mediriser was professional and communicative throughout the entire buying process.
The lying position in the Airvida Ultra makes sessions feel like true rest rather than a medical procedure. After six weeks of regular use my inflammation markers have dropped noticeably according to my doctor. The hard shell construction is premium and the 2.0 ATA ceiling gives flexibility for various therapeutic goals. Mediriser handled delivery and setup support perfectly.
The 550lb capacity of the Oasis Expandable was the primary reason we chose it and it handles the load with ease. The hi-low function is smooth and the expandable width means my husband has room to move comfortably. All electric adjustments work reliably. Mediriser was thorough in confirming the capacity and dimensions for our room before we ordered.
